Substrate preparation: 

• The base support surface must be durable, uniform, smooth, be clean, dry and free from foreign bodies. If thermal insulation defines the substrate, insulation boards should be installed fully adhered to the basis with DANOTHERM, without bigger separation than 1mm between insulation boards.
• Before laying the waterproofing membrane, DANOBOND adhesive must be used in the whole susbrate surface or insulation boards. The membrane should climb on the vertical face a minimum of 20 cm above the surface of the pavement. Any joint between metal profiles and the vertical surface, will be always sealed with elastic sealant ELASTYDAN PU 40 gris.

Waterproofing layer placement:

• The membrane will be placed fully adhered over the support or the insulation board, installed perpendicular to the roof maximum slope line, from the lowest point to the top of the roof. The watertightness between DANOPOL membranes will be achieved through thermoplastic welding with hot air welder, or using chemical agent THF (tetrahydrofuran).
• The overlaps between membranes must be 5 cm minimum and the welding must be at least 4cm. During the thermoplastic welding, use a silicon pressure roll.
• After the installation, it is recommendable to use a blunt metal needle (with a 1-3mm head radius), passing it along the union edge, verifying all the connections. There should not be more than 3 membranes coinciding in a single point. Special attention will be paid to T-Joints (three sheets intersecting at the same point).
• All membrane vertexes will be cut in a curve shape.
• To perform transversal membrane overlaps, or if any metal profile is intended to be set on the waterproofing membrane, they will be covered by welded 21cm DANOPOL HS 1.5 COVERSTRIP, with the same color.

Important details about this product:

• Length: 7.5m
• Width: 1m
• Thickness: 2.5mm
• Weight: 3 kg/m²
• Surface area: 7.5m²

Advantages & Benefits

• Minimal Thermal Variation - Exhibits little thermal variation, maintaining stability under different temperature conditions.
• High Dimensional Stability - Ensures consistent performance without significant deformation.
• Enhanced Bitumen Performance - The SBS-modified bitumen mastic significantly improves performance compared to other bituminous mastics, offering better elasticity, temperature reaction, and ageing resistance.
• Durability and Safety - Increased durability and safety of the waterproofing membrane due to enhanced material properties.
• Deformation and Stress Limitation - Effectively limits deformations and stresses in the waterproofing membrane.
• Excellent Multilayer Performance - Provides superior performance in multilayer systems with hot asphalt.
• Versatile Adaptability - Can adapt to any type of geometry, ensuring versatility in application.
• Compatibility with Molten Asphalt - Suitable for working with molten asphalt, enhancing its application range.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Substrate preparation: 

• The base support surface must be durable, uniform, smooth, be clean, dry and free from foreign bodies. If thermal insulation defines the substrate, insulation boards should be installed fully adhered to the basis with DANOTHERM, without bigger separation than 1mm between insulation boards.
• Before laying the waterproofing membrane, DANOBOND adhesive must be used in the whole susbrate surface or insulation boards. The membrane should climb on the vertical face a minimum of 20 cm above the surface of the pavement. Any joint between metal profiles and the vertical surface, will be always sealed with elastic sealant ELASTYDAN PU 40 gris.

Waterproofing layer placement:

• The membrane will be placed fully adhered over the support or the insulation board, installed perpendicular to the roof maximum slope line, from the lowest point to the top of the roof. The watertightness between DANOPOL membranes will be achieved through thermoplastic welding with hot air welder, or using chemical agent THF (tetrahydrofuran).
• The overlaps between membranes must be 5 cm minimum and the welding must be at least 4cm. During the thermoplastic welding, use a silicon pressure roll.
• After the installation, it is recommendable to use a blunt metal needle (with a 1-3mm head radius), passing it along the union edge, verifying all the connections. There should not be more than 3 membranes coinciding in a single point. Special attention will be paid to T-Joints (three sheets intersecting at the same point).
• All membrane vertexes will be cut in a curve shape.
• To perform transversal membrane overlaps, or if any metal profile is intended to be set on the waterproofing membrane, they will be covered by welded 21cm DANOPOL HS 1.5 COVERSTRIP, with the same color.

Important details about this product:

• Length: 7.5m
• Width: 1m
• Thickness: 2.5mm
• Weight: 3 kg/m²
• Surface area: 7.5m²

Advantages & Benefits

• Minimal Thermal Variation - Exhibits little thermal variation, maintaining stability under different temperature conditions.
• High Dimensional Stability - Ensures consistent performance without significant deformation.
• Enhanced Bitumen Performance - The SBS-modified bitumen mastic significantly improves performance compared to other bituminous mastics, offering better elasticity, temperature reaction, and ageing resistance.
• Durability and Safety - Increased durability and safety of the waterproofing membrane due to enhanced material properties.
• Deformation and Stress Limitation - Effectively limits deformations and stresses in the waterproofing membrane.
• Excellent Multilayer Performance - Provides superior performance in multilayer systems with hot asphalt.
• Versatile Adaptability - Can adapt to any type of geometry, ensuring versatility in application.
• Compatibility with Molten Asphalt - Suitable for working with molten asphalt, enhancing its application range.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Substrate preparation: 

• The base support surface must be durable, uniform, smooth, be clean, dry and free from foreign bodies. If thermal insulation defines the substrate, insulation boards should be installed fully adhered to the basis with DANOTHERM, without bigger separation than 1mm between insulation boards.
• Before laying the waterproofing membrane, DANOBOND adhesive must be used in the whole susbrate surface or insulation boards. The membrane should climb on the vertical face a minimum of 20 cm above the surface of the pavement. Any joint between metal profiles and the vertical surface, will be always sealed with elastic sealant ELASTYDAN PU 40 gris.

Waterproofing layer placement:

• The membrane will be placed fully adhered over the support or the insulation board, installed perpendicular to the roof maximum slope line, from the lowest point to the top of the roof. The watertightness between DANOPOL membranes will be achieved through thermoplastic welding with hot air welder, or using chemical agent THF (tetrahydrofuran).
• The overlaps between membranes must be 5 cm minimum and the welding must be at least 4cm. During the thermoplastic welding, use a silicon pressure roll.
• After the installation, it is recommendable to use a blunt metal needle (with a 1-3mm head radius), passing it along the union edge, verifying all the connections. There should not be more than 3 membranes coinciding in a single point. Special attention will be paid to T-Joints (three sheets intersecting at the same point).
• All membrane vertexes will be cut in a curve shape.
• To perform transversal membrane overlaps, or if any metal profile is intended to be set on the waterproofing membrane, they will be covered by welded 21cm DANOPOL HS 1.5 COVERSTRIP, with the same color.

Important details about this product:

• Length: 7.5m
• Width: 1m
• Thickness: 2.5mm
• Weight: 3 kg/m²
• Surface area: 7.5m²

Advantages & Benefits

• Minimal Thermal Variation - Exhibits little thermal variation, maintaining stability under different temperature conditions.
• High Dimensional Stability - Ensures consistent performance without significant deformation.
• Enhanced Bitumen Performance - The SBS-modified bitumen mastic significantly improves performance compared to other bituminous mastics, offering better elasticity, temperature reaction, and ageing resistance.
• Durability and Safety - Increased durability and safety of the waterproofing membrane due to enhanced material properties.
• Deformation and Stress Limitation - Effectively limits deformations and stresses in the waterproofing membrane.
• Excellent Multilayer Performance - Provides superior performance in multilayer systems with hot asphalt.
• Versatile Adaptability - Can adapt to any type of geometry, ensuring versatility in application.
• Compatibility with Molten Asphalt - Suitable for working with molten asphalt, enhancing its application range.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.