Preparation of the substrate

• Surface condition: It must be clean of dust, grease, paint residues, plaster and foreign bodies.
• Substrate preparation: Loose or poorly adhered particles shall be removed, so it is recommended to clean the surface to be primed. If necessary, the surface should be levelled with a mortar which should be properly trowelled.
• Type of substrate: CURIDAN should not be applied to polished surfaces as this may lead to adhesion failures.
• Substrate moisture: CURIDAN can be applied to dry or damp surfaces, but without water run-off.
• Drying time: Depends on ambient temperature, sunshine and relative humidity. Check that the primer is dry to the touch.
• Application tools: Can be applied by spray, brush, brush or roller.
• Minimum application temperature: CURIDAN must not be installed when the temperature is below +5°C.
• Priming and preparation of porous surfaces where a bituminous film is to be subsequently welded. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, making sure that the pores are well impregnated. The approximate coverage is 0.2-0.5 kg/m². In the case of bridges and parking decks, the coverage should be 0.2 kg/m². In bonded systems, the bituminous sheet is fully welded, so the entire surface must be primed. In non-bonded or floating systems, the bituminous sheet is only welded at singular points (parapets, drains, expansion joints, etc…), and these elements must be primed.
• Priming and preparation of porous surfaces that are subsequently to be waterproofed or treated with asphalt products. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, taking care to impregnate the pores well. It may be necessary to apply a second coat depending on the state and absorbent power of the substrate. The approximate coverage is 0.3-0.5 kg/m².
• Surface protection against humidity of buried concrete structures in civil works without great demands (walls, fins and abutments, foundations, pipelines, etc…). Two coats of CURIDAN should be applied with an approximate total final coverage between the two coats of 0.5-0.75 kg/m² depending on the substrate. Before applying one coat, check that the previous coat is completely dry.

Important details about this product:

• Colour: Dark brown
• Yield (kg/m²): 0.3-0.5
• Weight: 25kg

Advantages & Benefits:

• Water-Based and Solvent-Free - Environmentally friendly formulation that is safe to use.
• Good Adhesion - Provides reliable adhesion on wet and dry surfaces, enhancing application flexibility.
• Modified Bitumen Composition - Contains modified bitumen for improved performance and durability.
• Fluid and Easy Application - Easy to apply with a brush, paintbrush, roller, or spray, allowing for efficient coverage.
• Long Life Expectancy - Offers durability and long-term performance once applied.
• Versatile Application - Can be applied in closed rooms without concerns about fumes or ventilation requirements.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Preparation of the substrate

• Surface condition: It must be clean of dust, grease, paint residues, plaster and foreign bodies.
• Substrate preparation: Loose or poorly adhered particles shall be removed, so it is recommended to clean the surface to be primed. If necessary, the surface should be levelled with a mortar which should be properly trowelled.
• Type of substrate: CURIDAN should not be applied to polished surfaces as this may lead to adhesion failures.
• Substrate moisture: CURIDAN can be applied to dry or damp surfaces, but without water run-off.
• Drying time: Depends on ambient temperature, sunshine and relative humidity. Check that the primer is dry to the touch.
• Application tools: Can be applied by spray, brush, brush or roller.
• Minimum application temperature: CURIDAN must not be installed when the temperature is below +5°C.
• Priming and preparation of porous surfaces where a bituminous film is to be subsequently welded. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, making sure that the pores are well impregnated. The approximate coverage is 0.2-0.5 kg/m². In the case of bridges and parking decks, the coverage should be 0.2 kg/m². In bonded systems, the bituminous sheet is fully welded, so the entire surface must be primed. In non-bonded or floating systems, the bituminous sheet is only welded at singular points (parapets, drains, expansion joints, etc…), and these elements must be primed.
• Priming and preparation of porous surfaces that are subsequently to be waterproofed or treated with asphalt products. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, taking care to impregnate the pores well. It may be necessary to apply a second coat depending on the state and absorbent power of the substrate. The approximate coverage is 0.3-0.5 kg/m².
• Surface protection against humidity of buried concrete structures in civil works without great demands (walls, fins and abutments, foundations, pipelines, etc…). Two coats of CURIDAN should be applied with an approximate total final coverage between the two coats of 0.5-0.75 kg/m² depending on the substrate. Before applying one coat, check that the previous coat is completely dry.

Important details about this product:

• Colour: Dark brown
• Yield (kg/m²): 0.3-0.5
• Weight: 25kg

Advantages & Benefits:

• Water-Based and Solvent-Free - Environmentally friendly formulation that is safe to use.
• Good Adhesion - Provides reliable adhesion on wet and dry surfaces, enhancing application flexibility.
• Modified Bitumen Composition - Contains modified bitumen for improved performance and durability.
• Fluid and Easy Application - Easy to apply with a brush, paintbrush, roller, or spray, allowing for efficient coverage.
• Long Life Expectancy - Offers durability and long-term performance once applied.
• Versatile Application - Can be applied in closed rooms without concerns about fumes or ventilation requirements.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Preparation of the substrate

• Surface condition: It must be clean of dust, grease, paint residues, plaster and foreign bodies.
• Substrate preparation: Loose or poorly adhered particles shall be removed, so it is recommended to clean the surface to be primed. If necessary, the surface should be levelled with a mortar which should be properly trowelled.
• Type of substrate: CURIDAN should not be applied to polished surfaces as this may lead to adhesion failures.
• Substrate moisture: CURIDAN can be applied to dry or damp surfaces, but without water run-off.
• Drying time: Depends on ambient temperature, sunshine and relative humidity. Check that the primer is dry to the touch.
• Application tools: Can be applied by spray, brush, brush or roller.
• Minimum application temperature: CURIDAN must not be installed when the temperature is below +5°C.
• Priming and preparation of porous surfaces where a bituminous film is to be subsequently welded. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, making sure that the pores are well impregnated. The approximate coverage is 0.2-0.5 kg/m². In the case of bridges and parking decks, the coverage should be 0.2 kg/m². In bonded systems, the bituminous sheet is fully welded, so the entire surface must be primed. In non-bonded or floating systems, the bituminous sheet is only welded at singular points (parapets, drains, expansion joints, etc…), and these elements must be primed.
• Priming and preparation of porous surfaces that are subsequently to be waterproofed or treated with asphalt products. It can be used undiluted or diluted with water (10-20%), up to the desired concentration. Once the substrate is very dry, apply a coat of CURIDAN, taking care to impregnate the pores well. It may be necessary to apply a second coat depending on the state and absorbent power of the substrate. The approximate coverage is 0.3-0.5 kg/m².
• Surface protection against humidity of buried concrete structures in civil works without great demands (walls, fins and abutments, foundations, pipelines, etc…). Two coats of CURIDAN should be applied with an approximate total final coverage between the two coats of 0.5-0.75 kg/m² depending on the substrate. Before applying one coat, check that the previous coat is completely dry.

Important details about this product:

• Colour: Dark brown
• Yield (kg/m²): 0.3-0.5
• Weight: 25kg

Advantages & Benefits:

• Water-Based and Solvent-Free - Environmentally friendly formulation that is safe to use.
• Good Adhesion - Provides reliable adhesion on wet and dry surfaces, enhancing application flexibility.
• Modified Bitumen Composition - Contains modified bitumen for improved performance and durability.
• Fluid and Easy Application - Easy to apply with a brush, paintbrush, roller, or spray, allowing for efficient coverage.
• Long Life Expectancy - Offers durability and long-term performance once applied.
• Versatile Application - Can be applied in closed rooms without concerns about fumes or ventilation requirements.

Technical Data

Do you offer Free Delivery?

Yes! On most insulation orders over £350 Excluding Vat we can offer free delivery. However, this does depend on the delivery location and stock available. Sometimes stock may not be available at your local branch and may need to be delivered from a different branch which can alter the lead time or delivery charge. If this is the case one of our advisors will contact you to confirm any changes. Please feel free to send your enquiry over through get a quote or WhatsApp and we will work out the costs for you.

We always endeavour to have your order travel the least amount of miles to you in order to ensure free or the cheapest and most economic delivery option.

Orders below £350 Excluding Vat are usually subject to a delivery fee of £50 Excluding VAT on these items.

Where do you deliver to?

We can deliver these items to 99% of the UK population, utilising our various branches across England, Wales & Scotland.

To see if you are in our delivery area you can check the map below or find your postcode in the following list:
London: BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TW, UB, W, WC, WD
Other Postcodes: AL, B, BA, BB, BD, BH, BN, BS, CA, CB, CF, CM, CO, CT, CV, CW, DA, DD, DE, DG*, DH, DL, DN,DT, DY, EH, EX, FK, FY, G, GL, GU, HD, HG, HP, HU, HX, IP, KA, KY, L, LA, LE, LL, LN, LS, LU, M, ME, MK, ML, NE, NG, NN, NP, NR, OL, OX, PA*, PE, PH*, PL, PO*, RG, RH, RM, S, SG, SK, SL, SN, SO, SP, SR, SS, ST, SY, TA, TD*, TF, TN, TQ, TR, TS, WA, WF, WN, WR, WS, WV, YO
*Limited Areas: PO - Mainland Only. DG / PA / PH & TD - Please contact us as our delivery coverage is limited in these areas and subject to distance from the local branch and order size.

Please see the map here

Where will you deliver my order to?

Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. It is at the discretion of the courier where the order is left.

Please ensure you have ample space to offload.

Delivery access and site restrictions

We use pallet couriers for these items and they tend to be delivered on large 18T/26T lorries.

A Rigid lorry is approximately 18 / 26 tonnes with the capacity for 12 / 14 pallets. They are usually 10m / 12m Long, 4m high and 2.6m wide as an average.

Please ensure you advise us of any restrictions or access issues you may forsee with this size vehicle, failure to do so may result in extra delivery charges.

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched onto our lorries the next day.

However, sometimes our lorries are already full and booked, so this might be 2 to 5 working days after you place your order. In some scenarios the stock may need to be brought in from another branch which can extend the delivery time up to 10 working days from processing your order. Some areas are also subject to set delivery days due to their distance from the local branch.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why we need your contact number?

It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery.

For orders of this nature we will likely contact you after you have placed the order online to discuss delivery options and any site restrictions or offloading requirements you may have.

Please leave a mobile number as this is normally best for the delivery driver as well.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.