URSA Loft Roll 0.044 - (South and London Branch)

£32.10

 
UK Flat Roofing
 
 

Tablet

 

 

Mobile

Inverse Logo.png

URSA Loft Roll 0.044 - (South and London Branch)

£32.10 (inc VAT) £26.75 (ex VAT)

 
 

URSA Loft Roll 0.044 - (South and London Branch)

£32.10

inc. VAT

Ex VAT £11.50

PayPal

London - South Yorkshire - East Midlands - East
URSA
Loft Roll

  Same day dispatch if ordered before 12pm

Qty

URSA 10 Loft Roll is use as loft insulation in ventilated and unventilated cold roof spaces.

Product Sizes
100mm Thickness - Coverage 10.83sq.m
150mm Thickness - Coverage 8.55sq.m
170mm Thickness - Coverage 7.41sq.m
200mm Thickness - Coverage 6.27sq.m

When used in new buildings or upgrading existing buildings URSA 10 loft insulation is the most cost effective way to reduce heat loss through the roof.

URSA 10 Loft Roll - thermal conductivity 0.044 W/mK.

URSA Loft Roll is suitable for both ventilated and unventilated roof spaces and may be used in multiple layers to achieve very low U-values.

To minimise the condensation risk a vapour control layer is required when insulating between the rafters at ceiling level, this can either be a polythene sheet (minimum 500g) or a foil-backed plasterboard. The use of the vapour control layer also creates an air barrier that helps to improve the air tightness of the building and so limit air infiltration. The type of roofing underlay should be carefully considered. Breathable membranes (Type LR) may not require roof space ventilation provided they are covered by BBA certification. More traditional bitumen or polythene based membranes (Type HR) require provision for eaves and ridge ventilation.

The plasterboard ceiling should be sealed at the junction with walls with plaster, adhesive or flexible sealant and around service penetrations using a flexible sealant.

As the loft space remains cold any water services, tanks, pipes and cisterns must be insulated to avoid freezing or condensation problems. Omit insulation underneath water tanks at ceiing level as heat from inside the building will help to prevent the tanks from freezing.

Recessed lighting should be in a sufficienctly large enclosure to ensure continuity of the insulation whilst still allowing heat to dissipate from the lamp. The fixture should be sealed to maintain a vapour tight ceiling and prevent unwanted air leakage.

This is delivered from our branch that covers the South England & London - Please see map in images. If you are outside of this area please contact us.

Information

Branch: London - South Yorkshire - East Midlands - East

Brand: URSA

Thickness: 150mm

Type: Loft Roll

SKU: LR-URSA-150

 Same day dispatch if ordered before 12pm

 

Related Products