1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Roof Trims
5. Sure Edge Kerb Trim 2.5M

Sure Edge Kerb Trim 2.5M

£20.10 (inc. VAT)   £16.75 (ex. VAT)

20.000

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Kerb Trim

This EPDM kerb trim is used to improve the appearance of your roof edge and secure the membrane to the fascia edge. Creating a tight upstand seal, water will be directed away from the kerb and into the gutter system without seeping through any gaps.

This is designed with a compression seal along the underside to create a water-tight seal to the roofing membrane, eliminating the need of creating a timber upstand as a water check.

With quick & simple kerb trim installation in mind, it is ideal for Professional & DIY roofers looking for a durable and professional finish to their EPDM roofing system.

It has been manufactured using extremely strong uPVC to create a solid foam construction with hard-wearing, durable properties, ready to handle heavy rainfall without water seeping through (providing proper installation).

Available in Gloss White, Gloss Black & Gloss Anthracite Grey in 2.5-metre lengths.

If you are installing a new kerb trim system, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Kerb Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

Kerb Trim Features

• Creates a 20mm upstand at the roof edge
• Smooth, hi-gloss finish – easy to keep clean & great looking
• 10mm x 15mm sealing compression foam, factory fitted to the underside of the trim to create a water-tight seal to the membrane, over seams and detailing joins.
• Pre-drilled fixing holes, for accurate & fast installation
• Stainless Pins and Jointing Clips all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Kerb Trim

Watch our simple video guide for easy instructions on kerb trim installation. Please follow Sure Edge’s kerb trim instructions if you cannot access the video.

1.  Before installation of the membrane ensure a solid fixing can be achieved at the perimeter of the roof. A timber fixer can be installed if required.
2. Install the membrane to the roof surface as per the manufacturers’ specifications
3. Ensure the membrane extends down the vertical edge of the roof by a minimum of 50mm
4. Position the edge trim onto the roof surface so the sealant foam is compressed by 30% and the face of the trim is in a vertical position.
5. Using the 50mm PolyTop nails fix the edge trim into position. A fixing must be in each predrilled hole to achieve correct installation.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used. Ensure that each trim has a foam seal extending up the end to create a seal between trim lengths.
7. Fit the cover clips at each joint between lengths of trim
8. Install corners or stop ends where needed

Colour: Available in White, Black & Grey

Brand: Sure Edge Kerb

Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Kerb Trim

This EPDM kerb trim is used to improve the appearance of your roof edge and secure the membrane to the fascia edge. Creating a tight upstand seal, water will be directed away from the kerb and into the gutter system without seeping through any gaps.

This is designed with a compression seal along the underside to create a water-tight seal to the roofing membrane, eliminating the need of creating a timber upstand as a water check.

With quick & simple kerb trim installation in mind, it is ideal for Professional & DIY roofers looking for a durable and professional finish to their EPDM roofing system.

It has been manufactured using extremely strong uPVC to create a solid foam construction with hard-wearing, durable properties, ready to handle heavy rainfall without water seeping through (providing proper installation).

Available in Gloss White, Gloss Black & Gloss Anthracite Grey in 2.5-metre lengths.

If you are installing a new kerb trim system, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Kerb Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

Kerb Trim Features

• Creates a 20mm upstand at the roof edge
• Smooth, hi-gloss finish – easy to keep clean & great looking
• 10mm x 15mm sealing compression foam, factory fitted to the underside of the trim to create a water-tight seal to the membrane, over seams and detailing joins.
• Pre-drilled fixing holes, for accurate & fast installation
• Stainless Pins and Jointing Clips all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Kerb Trim

Watch our simple video guide for easy instructions on kerb trim installation. Please follow Sure Edge’s kerb trim instructions if you cannot access the video.

1.  Before installation of the membrane ensure a solid fixing can be achieved at the perimeter of the roof. A timber fixer can be installed if required.
2. Install the membrane to the roof surface as per the manufacturers’ specifications
3. Ensure the membrane extends down the vertical edge of the roof by a minimum of 50mm
4. Position the edge trim onto the roof surface so the sealant foam is compressed by 30% and the face of the trim is in a vertical position.
5. Using the 50mm PolyTop nails fix the edge trim into position. A fixing must be in each predrilled hole to achieve correct installation.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used. Ensure that each trim has a foam seal extending up the end to create a seal between trim lengths.
7. Fit the cover clips at each joint between lengths of trim
8. Install corners or stop ends where needed

Colour: Available in White, Black & Grey

Brand: Sure Edge Kerb

Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

UKFR - ROOFING AND INSULATION SPECIALISTS

Fixings Calculator

Effortlessly secure your warm roof deck with the correct size thermally broken fixings using our intuitive calculator! Simply input your deck type, insulation thickness, and top deck thickness (if applicable) and the calculator will add the compatible size tube and screw combination to your basket. It is crucial to use the correct warm deck insulation fixings so ensure lasting roof durability by using our simple calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

ClassicBond Calculator

Ordering has never been easier! With just a few clicks, input your roof dimensions, deck type, and edges. Our calculator will add all the necessary materials for installing your ClassicBond EPDM to your basket. Experience ease with our ClassicBond Calculator - Try it out below!

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Kerb Trim

This EPDM kerb trim is used to improve the appearance of your roof edge and secure the membrane to the fascia edge. Creating a tight upstand seal, water will be directed away from the kerb and into the gutter system without seeping through any gaps.

This is designed with a compression seal along the underside to create a water-tight seal to the roofing membrane, eliminating the need of creating a timber upstand as a water check.

With quick & simple kerb trim installation in mind, it is ideal for Professional & DIY roofers looking for a durable and professional finish to their EPDM roofing system.

It has been manufactured using extremely strong uPVC to create a solid foam construction with hard-wearing, durable properties, ready to handle heavy rainfall without water seeping through (providing proper installation).

Available in Gloss White, Gloss Black & Gloss Anthracite Grey in 2.5-metre lengths.

If you are installing a new kerb trim system, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Kerb Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

Kerb Trim Features

• Creates a 20mm upstand at the roof edge
• Smooth, hi-gloss finish – easy to keep clean & great looking
• 10mm x 15mm sealing compression foam, factory fitted to the underside of the trim to create a water-tight seal to the membrane, over seams and detailing joins.
• Pre-drilled fixing holes, for accurate & fast installation
• Stainless Pins and Jointing Clips all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Kerb Trim

Watch our simple video guide for easy instructions on kerb trim installation. Please follow Sure Edge’s kerb trim instructions if you cannot access the video.

1.  Before installation of the membrane ensure a solid fixing can be achieved at the perimeter of the roof. A timber fixer can be installed if required.
2. Install the membrane to the roof surface as per the manufacturers’ specifications
3. Ensure the membrane extends down the vertical edge of the roof by a minimum of 50mm
4. Position the edge trim onto the roof surface so the sealant foam is compressed by 30% and the face of the trim is in a vertical position.
5. Using the 50mm PolyTop nails fix the edge trim into position. A fixing must be in each predrilled hole to achieve correct installation.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used. Ensure that each trim has a foam seal extending up the end to create a seal between trim lengths.
7. Fit the cover clips at each joint between lengths of trim
8. Install corners or stop ends where needed

Colour: Available in White, Black & Grey

Brand: Sure Edge Kerb

Trim Dimensions

• Height: 100 mm
• Depth: 75mm
• Length: 2.5m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet