1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Roof Trims
5. Sure Edge Gutter Drip Trim 2.5M

Sure Edge Gutter Drip Trim 2.5M

£20.10 (inc. VAT)   £16.75 (ex. VAT)

20.000

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Gutter Drip Trim

The Sure Edge Gutter Drip Trim is used to secure the membrane on the fascia edge of the roof where a gutter drip is present, and stop water from running down the side of your home.

Designed to make gutter drip installation quick, clean and straightforward, it is ideal for Professional & DIY roofers looking for a professional and durable finish to their EPDM roofing system.

The flat roof gutter drip trim is made from extremely strong uPVC and comes in two parts.

If you are installing a new gutter drip system on your roof, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Gutter Drip Dimensions:

• 10mm thick back plate
• 75mm deep front plate
• 2.5 metres long so simply cut it down to the desired length and install

Gutter Drip features:

• Bevelled edge on the back plate to ensure easy alignment of the front plate
• Pre-drilled fixing holes, for accurate & fast installation of the front plate
• Stainless Pins and Jointing Clips are all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Flat Roof Gutter Drip Trim

Watch our simple video guide for easy instructions on gutter drip installation. If you cannot access the video, please follow Sure Edge’s gutter drip instructions:

1. Fix a timber batten to the front of the fascia, ensuring the top edge is level with the top of the decking. If there is an existing batten, ensure it is in suitable condition to get a sound fixing into.
2. Install the back plate onto the batten. Ensure that a 1mm expansion gap is left between lengths for each metre of trim used.
3. Dress the membrane down the face of the back plate. For best results, bond the membrane to the top and front of the back plate.
4. Position the front plate onto the rubber and the top edge of the front plate is below the level of the membrane.
5. Using the 50mm PolyTop nails, fix the front plate into position. A fixing must be done in each predrilled hole to achieve full compression.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used.
7. Trim the excess membrane below the back plate.
8. Fit the cover clips at each joint between lengths of trim
9. Install internal or external corners where needed.

Colour: Available in White, Black & Grey

Brand: Sure Edge

Gutter Drip Dimensions

• 10mm thick Back Plate
• 75mm depth
• 2.5 metres length

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Gutter Drip Trim

The Sure Edge Gutter Drip Trim is used to secure the membrane on the fascia edge of the roof where a gutter drip is present, and stop water from running down the side of your home.

Designed to make gutter drip installation quick, clean and straightforward, it is ideal for Professional & DIY roofers looking for a professional and durable finish to their EPDM roofing system.

The flat roof gutter drip trim is made from extremely strong uPVC and comes in two parts.

If you are installing a new gutter drip system on your roof, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Gutter Drip Dimensions:

• 10mm thick back plate
• 75mm deep front plate
• 2.5 metres long so simply cut it down to the desired length and install

Gutter Drip features:

• Bevelled edge on the back plate to ensure easy alignment of the front plate
• Pre-drilled fixing holes, for accurate & fast installation of the front plate
• Stainless Pins and Jointing Clips are all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Flat Roof Gutter Drip Trim

Watch our simple video guide for easy instructions on gutter drip installation. If you cannot access the video, please follow Sure Edge’s gutter drip instructions:

1. Fix a timber batten to the front of the fascia, ensuring the top edge is level with the top of the decking. If there is an existing batten, ensure it is in suitable condition to get a sound fixing into.
2. Install the back plate onto the batten. Ensure that a 1mm expansion gap is left between lengths for each metre of trim used.
3. Dress the membrane down the face of the back plate. For best results, bond the membrane to the top and front of the back plate.
4. Position the front plate onto the rubber and the top edge of the front plate is below the level of the membrane.
5. Using the 50mm PolyTop nails, fix the front plate into position. A fixing must be done in each predrilled hole to achieve full compression.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used.
7. Trim the excess membrane below the back plate.
8. Fit the cover clips at each joint between lengths of trim
9. Install internal or external corners where needed.

Colour: Available in White, Black & Grey

Brand: Sure Edge

Gutter Drip Dimensions

• 10mm thick Back Plate
• 75mm depth
• 2.5 metres length

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

UKFR - ROOFING AND INSULATION SPECIALISTS

Fixings Calculator

Effortlessly secure your warm roof deck with the correct size thermally broken fixings using our intuitive calculator! Simply input your deck type, insulation thickness, and top deck thickness (if applicable) and the calculator will add the compatible size tube and screw combination to your basket. It is crucial to use the correct warm deck insulation fixings so ensure lasting roof durability by using our simple calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

ClassicBond Calculator

Ordering has never been easier! With just a few clicks, input your roof dimensions, deck type, and edges. Our calculator will add all the necessary materials for installing your ClassicBond EPDM to your basket. Experience ease with our ClassicBond Calculator - Try it out below!

• Description
• Product Details
• Delivery
• Video
• Documents

Sure Edge Gutter Drip Trim

The Sure Edge Gutter Drip Trim is used to secure the membrane on the fascia edge of the roof where a gutter drip is present, and stop water from running down the side of your home.

Designed to make gutter drip installation quick, clean and straightforward, it is ideal for Professional & DIY roofers looking for a professional and durable finish to their EPDM roofing system.

The flat roof gutter drip trim is made from extremely strong uPVC and comes in two parts.

If you are installing a new gutter drip system on your roof, don’t forget to buy your corners! We sell Internal and External Sure Edge Corners available in the same colours as our gutter trim so everything can match up.

Gutter Drip Dimensions:

• 10mm thick back plate
• 75mm deep front plate
• 2.5 metres long so simply cut it down to the desired length and install

Gutter Drip features:

• Bevelled edge on the back plate to ensure easy alignment of the front plate
• Pre-drilled fixing holes, for accurate & fast installation of the front plate
• Stainless Pins and Jointing Clips are all included
• Complete range of colour-matched joints and corner accessories

How to install Sure Edge Flat Roof Gutter Drip Trim

Watch our simple video guide for easy instructions on gutter drip installation. If you cannot access the video, please follow Sure Edge’s gutter drip instructions:

1. Fix a timber batten to the front of the fascia, ensuring the top edge is level with the top of the decking. If there is an existing batten, ensure it is in suitable condition to get a sound fixing into.
2. Install the back plate onto the batten. Ensure that a 1mm expansion gap is left between lengths for each metre of trim used.
3. Dress the membrane down the face of the back plate. For best results, bond the membrane to the top and front of the back plate.
4. Position the front plate onto the rubber and the top edge of the front plate is below the level of the membrane.
5. Using the 50mm PolyTop nails, fix the front plate into position. A fixing must be done in each predrilled hole to achieve full compression.
6. Position the next length of the front plate leaving a 1mm expansion gap for each metre of trim used.
7. Trim the excess membrane below the back plate.
8. Fit the cover clips at each joint between lengths of trim
9. Install internal or external corners where needed.

Colour: Available in White, Black & Grey

Brand: Sure Edge

Gutter Drip Dimensions

• 10mm thick Back Plate
• 75mm depth
• 2.5 metres length

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	Sure Edge Kerb Trim - Data Sheet		Sure Edge Drip Trim - Data Sheet
	Sure Edge Accessories - Data Sheet