Used for ClassicBond EPDM Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane
Used for EPDM Rubber membrane to
- 3 inch Splice Tape
- 6 inch Cover Tape
- 9 inch Elastoform
- Pipe boot
- Internal Drain using 9" Elastoform etc
Available in these sizes: 250ml / 500ml / 1 L / 3.78L
A 250ml tin will cover the following
- Coverage: 13.0 Meters of RUSS Tape
- Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides)
- Coverage: 6.5 Metres of 6" Cover Tape
- Coverage: 4.5 Metres of 9" Elasoform Tape
Note: Do not use this primer to adhere membrane to membrane without the use of splice tape
Application
- Apply to EPDM rubber membrane only do not apply to tapes directly using a paint brush or scrubbing pad.
- Make sure the primer is even and does not puddle.
- Ensure that the primer is touch dry prior to applying mating parts