Used for ClassicBond EPDM Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane

Used for EPDM Rubber membrane to

• 3 inch Splice Tape
• 6 inch Cover Tape
• 9 inch Elastoform
• Pipe boot
• Internal Drain using 9" Elastoform etc

Available in these sizes: 250ml / 500ml / 1 L / 3.78L

A 250ml tin will cover the following

• Coverage: 13.0 Meters of RUSS Tape
• Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides)
• Coverage: 6.5 Metres of 6" Cover Tape
• Coverage: 4.5 Metres of 9" Elasoform Tape

Note: Do not use this primer to adhere membrane to membrane without the use of splice tape

Application

1. Apply to EPDM rubber membrane only do not apply to tapes directly using a paint brush or scrubbing pad.
2. Make sure the primer is even and does not puddle.
3. Ensure that the primer is touch dry prior to applying mating parts

Please Note: We supply the 250ml and 500m and 1L as tubs that are unbranded due to ClassicBond not supplying these sizes, they will be in metal containers wrapped in shrink-wrap for delivery. This allows less wastage on smaller jobs. As our smallest tub would be 3.78L which is enough for almost 100lm of 6 inch cover tape - this is more eco-friendly and allows for lower costs.

Used for ClassicBond EPDM Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane

Used for EPDM Rubber membrane to

• 3 inch Splice Tape
• 6 inch Cover Tape
• 9 inch Elastoform
• Pipe boot
• Internal Drain using 9" Elastoform etc

Available in these sizes: 250ml / 500ml / 1 L / 3.78L

A 250ml tin will cover the following

• Coverage: 13.0 Meters of RUSS Tape
• Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides)
• Coverage: 6.5 Metres of 6" Cover Tape
• Coverage: 4.5 Metres of 9" Elasoform Tape

Note: Do not use this primer to adhere membrane to membrane without the use of splice tape

Application

1. Apply to EPDM rubber membrane only do not apply to tapes directly using a paint brush or scrubbing pad.
2. Make sure the primer is even and does not puddle.
3. Ensure that the primer is touch dry prior to applying mating parts

Please Note: We supply the 250ml and 500m and 1L as tubs that are unbranded due to ClassicBond not supplying these sizes, they will be in metal containers wrapped in shrink-wrap for delivery. This allows less wastage on smaller jobs. As our smallest tub would be 3.78L which is enough for almost 100lm of 6 inch cover tape - this is more eco-friendly and allows for lower costs.

Used for ClassicBond EPDM Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane

Used for EPDM Rubber membrane to

• 3 inch Splice Tape
• 6 inch Cover Tape
• 9 inch Elastoform
• Pipe boot
• Internal Drain using 9" Elastoform etc

Available in these sizes: 250ml / 500ml / 1 L / 3.78L

A 250ml tin will cover the following

• Coverage: 13.0 Meters of RUSS Tape
• Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides)
• Coverage: 6.5 Metres of 6" Cover Tape
• Coverage: 4.5 Metres of 9" Elasoform Tape

Note: Do not use this primer to adhere membrane to membrane without the use of splice tape

Application

1. Apply to EPDM rubber membrane only do not apply to tapes directly using a paint brush or scrubbing pad.
2. Make sure the primer is even and does not puddle.
3. Ensure that the primer is touch dry prior to applying mating parts

Please Note: We supply the 250ml and 500m and 1L as tubs that are unbranded due to ClassicBond not supplying these sizes, they will be in metal containers wrapped in shrink-wrap for delivery. This allows less wastage on smaller jobs. As our smallest tub would be 3.78L which is enough for almost 100lm of 6 inch cover tape - this is more eco-friendly and allows for lower costs.