1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Accessories
5. ClassicBond Pipe Boot

ClassicBond Pipe Boot

£63.00 (inc. VAT)   £52.50 (ex. VAT)

20.000

• Desription
• Product Details
• Delivery
• Documents

ClassicBond EPDM pipe boot

Size Options
12mm - 75mm
25mm - 150mm

Used to create a waterproof seal between the roof deck and protruding pipework.

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Information

supplier: R4R

Size: 12mm to 75mm

Brand: ClassicBond

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate

• Desription
• Product Details
• Delivery
• Documents

ClassicBond EPDM pipe boot

Size Options
12mm - 75mm
25mm - 150mm

Used to create a waterproof seal between the roof deck and protruding pipework.

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Information

supplier: R4R

Size: 12mm to 75mm

Brand: ClassicBond

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Accessories
5. ClassicBond Pipe Boot

Warm Deck Insulation Fixings Calculator

• Desription
• Product Details
• Delivery
• Documents

ClassicBond EPDM pipe boot

Size Options
12mm - 75mm
25mm - 150mm

Used to create a waterproof seal between the roof deck and protruding pipework.

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Information

supplier: R4R

Size: 12mm to 75mm

Brand: ClassicBond

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate