ClassicBond SPB Spray Contact Adhesive 500ML - Coverage Up to 3sqm

£13.80

ⓘ We are closed from Thursday 28th September 12pm & will re-open Monday 2nd October.  All orders & enquiries will be processed & responded to on the Monday.

 
 
 

Tablet

 

 

Mobile

UKFR Inverse Logo.png

ClassicBond SPB Spray Contact Adhesive 500ML - Coverage Up to 3sqm

£13.80 (inc VAT) £11.50 (ex VAT)

 

ClassicBond SPB Spray Contact Adhesive 500ML - Coverage Up to 3sqm


£13.80

inc. VAT

Ex VAT
ClassicBond
Contact Adhesive
3sq.m
SKU: CB-Spray-005

 Same Day Dispatch - 2 - 5 Working Days Delivery

 1 to 5 Working Day Delivery - East England & London Branch

 Same Day Dispatch - 2 - 4 Working Days Delivery

 1 to 5 Working Day Delivery

 2 to 10 Working Day Delivery (Insulation Delivery)

 Free delivery on some insulation orders*

 2 - 10 Working Days Delivery

 Same Day Dispatch - 1 - 3 Working Days Delivery

 1 to 2 Working Days (Tuesday - Friday Delivery Only)

 1 to 5 Working Days Delivery - Preston Branch

 Articulated Lorry 3 to 5 Days – Rigid 5 to 10 Days

 2 - 5 Working Days Delivery

 2 - 10 Working Days Delivery

 Same Day Dispatch - 1 - 4 Working Days Delivery

 1 - 5 Working Days Delivery on most fixings - (See Delivery Tab below)

 Free Delivery on Fixings orders over £200 ex. VAT*

 5 - 15 Working Days with Manufacturing Time

 1 to 7 Working Days (UK Insulation Network)

 Free delivery on some insulation orders*

  Same Day Dispatch - 1 - 2 Working Days Delivery

  Same Day Dispatch - 1 - 2 Working Days Delivery

  Same Day Dispatch - 1 - 4 Working Days Delivery

 1 to 2 Working Days (Tuesday - Friday Delivery Only)

 Free Delivery on GrufeKit orders over £400 ex. VAT

 Delivery of Trims has been impacted by Nationwide courier issues.
Unfortunately our alternative couriers can't currently facilitate 3m lengths as a nationwide delivery option.

For Metal Trims we may need to cut these into 3x 1m lengths
For Sure Edge Trims we may need to cut these into 2 x 1.25m lengths.
We will contact you if your order is affected by this.

Qty

PayPal

Pay via:

           
 

ClassicBond Sprayable Contact Bonding Adhesive

Used For: Adheres ClassicBond rubber membrane to most materials. Used on up-stands and vertical surfaces

Size: 500ml (Coverage up to 3 sqm)

Coverage: 0.17 Ltr / m2 when applied to both sides (depending on surfaces)

Advantages of traditional Contact Bonding Adhesive:

  • Up to 6 times faster application time
  • Up to 4 times faster drying time
  • Increased operating window
  • Zero Waste
  • Up to 3 square metres per cannister

Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.

Application Non-Permeable Deck: Spray the adhesive on to both the deck and underside of membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.

Installation Tip: Allow sufficient time for the the contact adhesive to become touch dry dependant on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.

Information

supplier: R4R

Brand: ClassicBond

Glue Type: Contact Adhesive

Coverage: 3sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

What is the difference between Standard Delivery and Express Delivery?

Standard delivery is usually delivered within 1 - 4 working days

Express delivery is usually delivered within 1 - 2 working days

ClassicBond Sprayable Contact Bonding Adhesive

Used For: Adheres ClassicBond rubber membrane to most materials. Used on up-stands and vertical surfaces

Size: 500ml (Coverage up to 3 sqm)

Coverage: 0.17 Ltr / m2 when applied to both sides (depending on surfaces)

Advantages of traditional Contact Bonding Adhesive:

  • Up to 6 times faster application time
  • Up to 4 times faster drying time
  • Increased operating window
  • Zero Waste
  • Up to 3 square metres per cannister

Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.

Application Non-Permeable Deck: Spray the adhesive on to both the deck and underside of membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.

Installation Tip: Allow sufficient time for the the contact adhesive to become touch dry dependant on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.

Information

supplier: R4R

Brand: ClassicBond

Glue Type: Contact Adhesive

Coverage: 3sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

What is the difference between Standard Delivery and Express Delivery?

Standard delivery is usually delivered within 1 - 4 working days

Express delivery is usually delivered within 1 - 2 working days

 

Related Products



Related Products


ClassicBond EPDM Adhesives
CB-Spray-005
ClassicBond

CALCULATORS DIVIDER

 

WARM DECK INSULATION FIXINGS CALCULATOR


ukflatclone_fixingscalc_image.png

ClassicBond Sprayable Contact Bonding Adhesive

Used For: Adheres ClassicBond rubber membrane to most materials. Used on up-stands and vertical surfaces

Size: 500ml (Coverage up to 3 sqm)

Coverage: 0.17 Ltr / m2 when applied to both sides (depending on surfaces)

Advantages of traditional Contact Bonding Adhesive:

  • Up to 6 times faster application time
  • Up to 4 times faster drying time
  • Increased operating window
  • Zero Waste
  • Up to 3 square metres per cannister

Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.

Application Non-Permeable Deck: Spray the adhesive on to both the deck and underside of membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.

Installation Tip: Allow sufficient time for the the contact adhesive to become touch dry dependant on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.

Information

supplier: R4R

Brand: ClassicBond

Glue Type: Contact Adhesive

Coverage: 3sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

What is the difference between Standard Delivery and Express Delivery?

Standard delivery is usually delivered within 1 - 4 working days

Express delivery is usually delivered within 1 - 2 working days