1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Accessories
5. ClassicBond Pipe Boot

ClassicBond Pipe Boot

£59.99 (inc. VAT)   £49.99 (ex. VAT)

20.000

• Desription
• Product Details
• Delivery
• Documents

The ClassicBond Pipe Boot is used to create a waterproof seal between the roof deck and protruding pipework.

Other items required:

• EPDM Rubber Primer
• Seam Roller
• Water Cut Off Mastic

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Important details about this product:

• Sizes available: 12-75mm & 25-150mm
• Material: Moulded EPDM
• Colour: Black

Key Features & Benefits

• Easily creates a waterproof seal between the roof deck and protruding piperwork
• Durable

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate

• Desription
• Product Details
• Delivery
• Documents

The ClassicBond Pipe Boot is used to create a waterproof seal between the roof deck and protruding pipework.

Other items required:

• EPDM Rubber Primer
• Seam Roller
• Water Cut Off Mastic

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Important details about this product:

• Sizes available: 12-75mm & 25-150mm
• Material: Moulded EPDM
• Colour: Black

Key Features & Benefits

• Easily creates a waterproof seal between the roof deck and protruding piperwork
• Durable

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

UKFR - ROOFING AND INSULATION SPECIALISTS

Fixings Calculator

Effortlessly secure your warm roof deck with the correct size thermally broken fixings using our intuitive calculator! Simply input your deck type, insulation thickness, and top deck thickness (if applicable) and the calculator will add the compatible size tube and screw combination to your basket. It is crucial to use the correct warm deck insulation fixings so ensure lasting roof durability by using our simple calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

ClassicBond Calculator

EPDM Rubber Roofing has never been easier! Simply enter your roof dimensions, deck type, and roof edges, and the calculator will add all necessary materials for installing your ClassicBond EPDM rubber roof to your basket.

Experience simplicity with our ClassicBond Calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

SkyGuard Calculator

SkyGuard Shed Roofing has never been easier!

Our innovative shed roof calculator will automatically add the required quantity of materials to your basket - simply enter your roof dimensions, select your edges and trim preferences and add to basket.

Simplify your DIY with the SkyGuard Shed Roof Calculator today!

Start - SkyGuard Calc

End - SkyGuard Calc

• Desription
• Product Details
• Delivery
• Documents

The ClassicBond Pipe Boot is used to create a waterproof seal between the roof deck and protruding pipework.

Other items required:

• EPDM Rubber Primer
• Seam Roller
• Water Cut Off Mastic

Installation Notes

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter
2. Mark the roofing membrane to show where rubber primer is to be applied
3. Remove boot and apply rubber primer
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Important details about this product:

• Sizes available: 12-75mm & 25-150mm
• Material: Moulded EPDM
• Colour: Black

Key Features & Benefits

• Easily creates a waterproof seal between the roof deck and protruding piperwork
• Durable

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Pipe Seals		ClassicBond Installation Guide
	ClassicBond BBA Certificate