1. Home
2. GRP & Liquid Roofing Products
3. Liquid Roofing Products
4. Back to ClassicLiquid
5. ClassicLiquid Primer 4ltr - Coverage 25sq.m

ClassicLiquid Primer 4ltr - Coverage 25sq.m

£84.30 (inc. VAT)   £70.25 (ex. VAT)

20.000

• Description
• Product Details
• Delivery
• Documents

Brand has being discontinued - please see our new Liquid Products ARBOFLEX PU.

The ClassicLiquid Primer is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.

This 4 Litre ClassicLiquid Primer is a single component polyurethane primer and can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porosity between 0.1 litres to 0.3 litres per square metre. Typically a semi porous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximately 20 square metres.

Primeable Surfaces

Asphalt
Built Up Felt
Ceramic Tiles
OSB Decking and all other Timber surfaces
Recovery Boards
GRP
Metal
As a reactivation overcoat primer over ClassicLiquid products if these products require recoating outside of the 48 hours window.

Application

It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary depending on surface porosity. Allow the primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)

Why ClassicLiquid?

• Very Competitively Priced
• Fast Curing
• Single coat (of membrane) application possible
• Bubble free smooth finish
• Easy to apply - due to lack of reinforcing fabric
• Excellent weather & UV resistance
• Will remain elastic down to 40c
• Will not soften in high temperatures
• High tensile and tear strength, excellent abrasion resistance
• Showerproof in 30 minutes
• Seamless finish
• Trafficable in 24 hours

Information

supplier: R4R

Size: 4L

Brand: ClassicLiquid

Guarantee Length: Upto 20 Years

Coverage: 25sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

ClassicLiquid Brochure and Installation Guide

• Description
• Product Details
• Delivery
• Documents

Brand has being discontinued - please see our new Liquid Products ARBOFLEX PU.

The ClassicLiquid Primer is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.

This 4 Litre ClassicLiquid Primer is a single component polyurethane primer and can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porosity between 0.1 litres to 0.3 litres per square metre. Typically a semi porous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximately 20 square metres.

Primeable Surfaces

Asphalt
Built Up Felt
Ceramic Tiles
OSB Decking and all other Timber surfaces
Recovery Boards
GRP
Metal
As a reactivation overcoat primer over ClassicLiquid products if these products require recoating outside of the 48 hours window.

Application

It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary depending on surface porosity. Allow the primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)

Why ClassicLiquid?

• Very Competitively Priced
• Fast Curing
• Single coat (of membrane) application possible
• Bubble free smooth finish
• Easy to apply - due to lack of reinforcing fabric
• Excellent weather & UV resistance
• Will remain elastic down to 40c
• Will not soften in high temperatures
• High tensile and tear strength, excellent abrasion resistance
• Showerproof in 30 minutes
• Seamless finish
• Trafficable in 24 hours

Information

supplier: R4R

Size: 4L

Brand: ClassicLiquid

Guarantee Length: Upto 20 Years

Coverage: 25sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

ClassicLiquid Brochure and Installation Guide

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

1. Home
2. GRP & Liquid Roofing Products
3. Liquid Roofing Products
4. Back to ClassicLiquid
5. ClassicLiquid Primer 4ltr - Coverage 25sq.m

Warm Deck Insulation Fixings Calculator

• Description
• Product Details
• Delivery
• Documents

Brand has being discontinued - please see our new Liquid Products ARBOFLEX PU.

The ClassicLiquid Primer is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.

This 4 Litre ClassicLiquid Primer is a single component polyurethane primer and can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porosity between 0.1 litres to 0.3 litres per square metre. Typically a semi porous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximately 20 square metres.

Primeable Surfaces

Asphalt
Built Up Felt
Ceramic Tiles
OSB Decking and all other Timber surfaces
Recovery Boards
GRP
Metal
As a reactivation overcoat primer over ClassicLiquid products if these products require recoating outside of the 48 hours window.

Application

It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary depending on surface porosity. Allow the primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)

Why ClassicLiquid?

• Very Competitively Priced
• Fast Curing
• Single coat (of membrane) application possible
• Bubble free smooth finish
• Easy to apply - due to lack of reinforcing fabric
• Excellent weather & UV resistance
• Will remain elastic down to 40c
• Will not soften in high temperatures
• High tensile and tear strength, excellent abrasion resistance
• Showerproof in 30 minutes
• Seamless finish
• Trafficable in 24 hours

Information

supplier: R4R

Size: 4L

Brand: ClassicLiquid

Guarantee Length: Upto 20 Years

Coverage: 25sq.m

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you asap.

ClassicLiquid Brochure and Installation Guide