Classic Liquid Joint Seal 600cc


UK Flat Roofing





Inverse Logo.png

Classic Liquid Joint Seal 600cc

£11.99 (inc VAT) £9.99 (ex VAT)


Classic Liquid Joint Seal 600cc


inc. VAT

Ex VAT £11.50


Upto 20 Years

  Same day dispatch if ordered before 12pm


The ClassicLiquid joint sealant adheres to most substrates and is perfect for creating a fillet on 90 angles. E.g upstands, skylights, pipework etc. It is also ideal for filling minor blemishes in the subsrate.

The sealant is easy to apply even in very low temperatures and the storage stability is unlike any polyurethane sealant in the market. The Sealant is applied using a Mastic Applicator Gun.

24 metres at 5mm wide x 5mm deep
12 metres at 10mm wide x 5mm deep
4 metres at 15mm wide x 10mm deep
3 metres at 20mm wide x 10mm deep


Clean joint thoroughly and ensure that no oil, grease, silicone or wax contaminants are present.

For most applications primer is not required unless onto a very porous or friable surface, if primer required use ClassicLiquid Primer.

Bond area surfaces thoroughly to avoid the possibility of air bubbles being blown into the uncured product if the substrate temperature rises.

On applications where the depth of the expansion joint exceeds the width then it is necessary to use an open cell polyurethane backing rod (of suitable size) to ensure a firm backing to the Joint Mastic against which it can be tooled off.

Slide the 600cc foil cartridge into the application gun, cut off the very end of the sealant packaging and fit the gun with the nozzle that has been cut to deliver the right bead size for the given application.

Extrude the Joint Mastic into the joint ensuring that no air is trapped in the joint. Wide joints may well require more than one pass of the application gun to ensure full contact of the Joint Mastic with the sides and bottom of the joint.

Tooling of the Joint Mastic is recommended immediately after application of the sealant to ensure that all air bubbles are excluded and a smooth finish provided if other products are being applied over.

Recommended For Sealing Joints in:

  • In situ concrete
  • Expansion concrete plates
  • Precast panels
  • Brick and block work
  • Water tanks
  • Metal frames
  • Aluminium windows and panels
  • Water tanks and swimming pools
  • Sealing between T&G joints in OSB3 T&G structural roof decks

Features and Benefits

  • Excellent adhesion to almost any surface
  • Excellent extrusion, tooling and storage stability over a wide range of climatic conditions
  • Excellent chemical resistance, suitable for sealing joints in swimming pools and chemically treated water
  • Low modulus, joint movement accommodation 50%
  • Microorganism and fungus resistant
  • Application underwater immersion possible
  • Excellent resistance to heat >600C and will remain flexible down to -400C


Brand: ClassicLiquid

Guarantee Length: Upto 20 Years

Delivery - 1 - 5 Working Days

SKU: CL-Joint-Mastic

 Same day dispatch if ordered before 12pm


Related Products