Product Features

• Single component polyurethanebased resin.
• Requires a flat, clean, dry and solid surface.
• Can be applied on porous surfaces: concrete, cement, and on plywood (not suitable for OSB).
• Can be diluted in support of low absorption.
• Can be applied with a brush or a roller.
• Can be applied on surfaces with a maximum surface humidity of 5%.
• Do not apply to surfaces that are damp or exuding water from the interior of the substrate (water pressure due to phreatic level, condensation leaks, etc.).
• Can be applied in combination with mineral particles (silica sand) on very uneven surfaces.
• High solids content.
• Translucent.
• Excellent bond on porous surfaces.

Coverage

Depending on the condition of the surface to be treated, the yield can vary between 100~200 g/m 2 , in one or several thin layers (do not apply thick coats).

In applications onto existing PUA and PU membranes, the consumption will be between 50-100 g/m 2 .

• PUA / PU Membranes a 5kg tin will cover - 50-100sq.m
• Other surfaces a 5kg tin will cover -- 25-100sq.m

Storage Life

12 months for each product at temperatures between 5° C and 35° C, provided it is stored in a dry place. Once the tin has been opened, the product must be used immediately

Product Specification

• Density at 23 ºC ISO 1675: 1.110 kg/m3
• Solids content ISO 1768: >80%
• VOC(volatile organic compounds): 270 g/l
• Adhesion to concrete: >2N/mm2 (MPa)
• Viscosity at 23 ºC ISO 2555: 120 cps
• Tack free time at 23 ºC: 60 minutes
• Final dry time at 23 ºC: 2~3 hours
• Recoat range time at 23 ºC: 3~24 hours
• Environmental application temperature: 5~35 C
• Max. Moisture on the support:  5%

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Product Features

• Single component polyurethanebased resin.
• Requires a flat, clean, dry and solid surface.
• Can be applied on porous surfaces: concrete, cement, and on plywood (not suitable for OSB).
• Can be diluted in support of low absorption.
• Can be applied with a brush or a roller.
• Can be applied on surfaces with a maximum surface humidity of 5%.
• Do not apply to surfaces that are damp or exuding water from the interior of the substrate (water pressure due to phreatic level, condensation leaks, etc.).
• Can be applied in combination with mineral particles (silica sand) on very uneven surfaces.
• High solids content.
• Translucent.
• Excellent bond on porous surfaces.

Coverage

Depending on the condition of the surface to be treated, the yield can vary between 100~200 g/m 2 , in one or several thin layers (do not apply thick coats).

In applications onto existing PUA and PU membranes, the consumption will be between 50-100 g/m 2 .

• PUA / PU Membranes a 5kg tin will cover - 50-100sq.m
• Other surfaces a 5kg tin will cover -- 25-100sq.m

Storage Life

12 months for each product at temperatures between 5° C and 35° C, provided it is stored in a dry place. Once the tin has been opened, the product must be used immediately

Product Specification

• Density at 23 ºC ISO 1675: 1.110 kg/m3
• Solids content ISO 1768: >80%
• VOC(volatile organic compounds): 270 g/l
• Adhesion to concrete: >2N/mm2 (MPa)
• Viscosity at 23 ºC ISO 2555: 120 cps
• Tack free time at 23 ºC: 60 minutes
• Final dry time at 23 ºC: 2~3 hours
• Recoat range time at 23 ºC: 3~24 hours
• Environmental application temperature: 5~35 C
• Max. Moisture on the support:  5%

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

Product Features

• Single component polyurethanebased resin.
• Requires a flat, clean, dry and solid surface.
• Can be applied on porous surfaces: concrete, cement, and on plywood (not suitable for OSB).
• Can be diluted in support of low absorption.
• Can be applied with a brush or a roller.
• Can be applied on surfaces with a maximum surface humidity of 5%.
• Do not apply to surfaces that are damp or exuding water from the interior of the substrate (water pressure due to phreatic level, condensation leaks, etc.).
• Can be applied in combination with mineral particles (silica sand) on very uneven surfaces.
• High solids content.
• Translucent.
• Excellent bond on porous surfaces.

Coverage

Depending on the condition of the surface to be treated, the yield can vary between 100~200 g/m 2 , in one or several thin layers (do not apply thick coats).

In applications onto existing PUA and PU membranes, the consumption will be between 50-100 g/m 2 .

• PUA / PU Membranes a 5kg tin will cover - 50-100sq.m
• Other surfaces a 5kg tin will cover -- 25-100sq.m

Storage Life

12 months for each product at temperatures between 5° C and 35° C, provided it is stored in a dry place. Once the tin has been opened, the product must be used immediately

Product Specification

• Density at 23 ºC ISO 1675: 1.110 kg/m3
• Solids content ISO 1768: >80%
• VOC(volatile organic compounds): 270 g/l
• Adhesion to concrete: >2N/mm2 (MPa)
• Viscosity at 23 ºC ISO 2555: 120 cps
• Tack free time at 23 ºC: 60 minutes
• Final dry time at 23 ºC: 2~3 hours
• Recoat range time at 23 ºC: 3~24 hours
• Environmental application temperature: 5~35 C
• Max. Moisture on the support:  5%

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.