Do you offer Free Delivery?
Yes! On rooflight orders over £800 Excluding Vat we can offer free delivery. 
Orders below £800 Excluding Vat are subject to a delivery fee of £30 Excluding VAT on these items.

Where do you deliver to?
We can deliver these items to mainland UK 

Where will you deliver my order to?
Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. The delivery driver will not manually offload or assist in manually offloading the products. 

Due to the size and/or weight of the products, we strongly recommend that the products should be offloaded by mechanical means, for example a forklift truck or crane. This can be organised by us at an additional cost.

Please ensure you have somewhere suitable to store the rooflights as timber or stillages cannot be used from the vehicle. Please ensure you have ample space to offload.

Delivery access and site restrictions
Please ensure you advise us of any site restrictions or access issues you may foresee, failure to do so may result in extra delivery charges.

For example, these items may be delivered on a large lorry so our team needs to be aware of any narrow roads, height restrictions or other access requirements to avoid a failed delivery. If delivery fails due to nobody available to take the goods or the driver being unable to offload then a re delivery charge will be applied.

When do you dispatch orders?
We are often able to dispatch orders same day for if ordered before 1pm (exceptions apply). Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why do we need your contact number?
It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery and avoid re delivery charges in the event there are site access issues.

Please leave a mobile number as this is normally best for the delivery driver as well. If you must leave an office number, please provide clear instructions for any extensions that may be required to contact the named person.

How much will my delivery cost?
For orders over £800 Excluding VAT delivery is free. For orders below £800 Excluding VAT delivery is £30.

How long will my delivery take?
Standard rooflights are delivered within 1-3 working days. Roof Lanterns are delivered within 3-5 working days.Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

How will my rooflight be packaged?
We ensure our rooflights are protected as best as possible during transportation. Most larger glass units will be shipped on a pallet. 
If goods are damaged in transit please ensure to sign the carrier note accordingly and notify us within 24-48 hours of receipt of goods. Failure to do so within this timeframe may mean we are unable to assist.

How to measure your rooflights

To suit a flat glass rooflight with your own builders upstand

When purchasing a flat glass roof window without a pre installed upstand (to suit a builders kerb), please ensure the outside edge of your own timber upstands are positioned at the same distance as your chosen roof light size.

For example, if you have a rooflight which measures 750mm x 750mm, you need to ensure the measurement from the outside edges of your upstand is the same. Please see the image for further clarification. 

A 50mm wide upstand is recommended as minimum with a maximum width of 120mm. With the lowest edge at 150mm high.

Please see the image A for further clarification.

To suit the Skyvu Lantern

When purchasing a Skyvu lantern  unit, the size you choose needs to represent the dimensions  from the external edge of the kerb. Please ensure that you have upstands of a minimum of 100mm wide.

For example if you purchase a Skyvu Lantern at 600mm x 600mm then this will correlate to the size of the roof opening to the outer edge of the kerb.

Please see the image A for further clarification.

To suit flat glass roof window with a pre installed upstand/kerb

When purchasing a flat glass roof window unit with a pre-installed timber upstand or UPVC upstand, the stated dimensions represent the opening in the roof. Please ensure to measure the opening in the roof and then ensure that this measurement is the same size as the purchased skylight. 

For example, if your skylight is 650mm x 650mm, the opening in the roof also needs to be 
650mm x 650mm.

Please see the image B for further clarification.

For more information on constructing your timber upstand please see the brochure here.

How to choose your rooflight kerb type

Choosing the kerb type for your rooflight depends on your roof, however we have two options to choose from which are detailed below.

Builders Kerb
For when you have or will be constructing your own builders kerb on site. When manufacturing your own builders kerb, it is essential that you either have a minimum slope of 5 degrees across your roof or your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as long as you build a 5 degree minimum slope into the upstand.

Timber Kerb with 5 Degree Sloping Upstand
Your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as the roof light has a built in 5 degree slope for water runoff.

UPVC Kerb without a slope
For this kerb type there is no built in slope so it is essential that your roof has a minimum of 5 degrees to then install the rooflight onto to ensure water runoff.

For more information please see the brochure here.

Do you offer Free Delivery?
Yes! On rooflight orders over £800 Excluding Vat we can offer free delivery. 
Orders below £800 Excluding Vat are subject to a delivery fee of £30 Excluding VAT on these items.

Where do you deliver to?
We can deliver these items to mainland UK 

Where will you deliver my order to?
Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. The delivery driver will not manually offload or assist in manually offloading the products. 

Due to the size and/or weight of the products, we strongly recommend that the products should be offloaded by mechanical means, for example a forklift truck or crane. This can be organised by us at an additional cost.

Please ensure you have somewhere suitable to store the rooflights as timber or stillages cannot be used from the vehicle. Please ensure you have ample space to offload.

Delivery access and site restrictions
Please ensure you advise us of any site restrictions or access issues you may foresee, failure to do so may result in extra delivery charges.

For example, these items may be delivered on a large lorry so our team needs to be aware of any narrow roads, height restrictions or other access requirements to avoid a failed delivery. If delivery fails due to nobody available to take the goods or the driver being unable to offload then a re delivery charge will be applied.

When do you dispatch orders?
We are often able to dispatch orders same day for if ordered before 1pm (exceptions apply). Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why do we need your contact number?
It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery and avoid re delivery charges in the event there are site access issues.

Please leave a mobile number as this is normally best for the delivery driver as well. If you must leave an office number, please provide clear instructions for any extensions that may be required to contact the named person.

How much will my delivery cost?
For orders over £800 Excluding VAT delivery is free. For orders below £800 Excluding VAT delivery is £30.

How long will my delivery take?
Standard rooflights are delivered within 1-3 working days. Roof Lanterns are delivered within 3-5 working days.Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

How will my rooflight be packaged?
We ensure our rooflights are protected as best as possible during transportation. Most larger glass units will be shipped on a pallet. 
If goods are damaged in transit please ensure to sign the carrier note accordingly and notify us within 24-48 hours of receipt of goods. Failure to do so within this timeframe may mean we are unable to assist.

How to measure your rooflights

To suit a flat glass rooflight with your own builders upstand

When purchasing a flat glass roof window without a pre installed upstand (to suit a builders kerb), please ensure the outside edge of your own timber upstands are positioned at the same distance as your chosen roof light size.

For example, if you have a rooflight which measures 750mm x 750mm, you need to ensure the measurement from the outside edges of your upstand is the same. Please see the image for further clarification. 

A 50mm wide upstand is recommended as minimum with a maximum width of 120mm. With the lowest edge at 150mm high.

Please see the image A for further clarification.

To suit the Skyvu Lantern

When purchasing a Skyvu lantern  unit, the size you choose needs to represent the dimensions  from the external edge of the kerb. Please ensure that you have upstands of a minimum of 100mm wide.

For example if you purchase a Skyvu Lantern at 600mm x 600mm then this will correlate to the size of the roof opening to the outer edge of the kerb.

Please see the image A for further clarification.

To suit flat glass roof window with a pre installed upstand/kerb

When purchasing a flat glass roof window unit with a pre-installed timber upstand or UPVC upstand, the stated dimensions represent the opening in the roof. Please ensure to measure the opening in the roof and then ensure that this measurement is the same size as the purchased skylight. 

For example, if your skylight is 650mm x 650mm, the opening in the roof also needs to be 
650mm x 650mm.

Please see the image B for further clarification.

For more information on constructing your timber upstand please see the brochure here.

How to choose your rooflight kerb type

Choosing the kerb type for your rooflight depends on your roof, however we have two options to choose from which are detailed below.

Builders Kerb
For when you have or will be constructing your own builders kerb on site. When manufacturing your own builders kerb, it is essential that you either have a minimum slope of 5 degrees across your roof or your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as long as you build a 5 degree minimum slope into the upstand.

Timber Kerb with 5 Degree Sloping Upstand
Your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as the roof light has a built in 5 degree slope for water runoff.

UPVC Kerb without a slope
For this kerb type there is no built in slope so it is essential that your roof has a minimum of 5 degrees to then install the rooflight onto to ensure water runoff.

For more information please see the brochure here.

Do you offer Free Delivery?
Yes! On rooflight orders over £800 Excluding Vat we can offer free delivery. 
Orders below £800 Excluding Vat are subject to a delivery fee of £30 Excluding VAT on these items.

Where do you deliver to?
We can deliver these items to mainland UK 

Where will you deliver my order to?
Please note that all of our deliveries are kerbside only and it is your responsibility to get it from the Kerb onto your property. The delivery driver will not manually offload or assist in manually offloading the products. 

Due to the size and/or weight of the products, we strongly recommend that the products should be offloaded by mechanical means, for example a forklift truck or crane. This can be organised by us at an additional cost.

Please ensure you have somewhere suitable to store the rooflights as timber or stillages cannot be used from the vehicle. Please ensure you have ample space to offload.

Delivery access and site restrictions
Please ensure you advise us of any site restrictions or access issues you may foresee, failure to do so may result in extra delivery charges.

For example, these items may be delivered on a large lorry so our team needs to be aware of any narrow roads, height restrictions or other access requirements to avoid a failed delivery. If delivery fails due to nobody available to take the goods or the driver being unable to offload then a re delivery charge will be applied.

When do you dispatch orders?
We are often able to dispatch orders same day for if ordered before 1pm (exceptions apply). Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

Please ensure to leave a mobile number so that we can contact you with your delivery date once we have received confirmation from the local branch. This also allows ourselves or the delivery driver to contact you if there are any issues with your delivery.

Why do we need your contact number?
It is essential for us to have your contact number to allow ourselves or the delivery driver to contact you if there is an issue with your delivery and avoid re delivery charges in the event there are site access issues.

Please leave a mobile number as this is normally best for the delivery driver as well. If you must leave an office number, please provide clear instructions for any extensions that may be required to contact the named person.

How much will my delivery cost?
For orders over £800 Excluding VAT delivery is free. For orders below £800 Excluding VAT delivery is £30.

How long will my delivery take?
Standard rooflights are delivered within 1-3 working days. Roof Lanterns are delivered within 3-5 working days.Special order units may take 1–3 weeks for delivery. Bespoke units can be manufactured in as little as 3–5 weeks.

How will my rooflight be packaged?
We ensure our rooflights are protected as best as possible during transportation. Most larger glass units will be shipped on a pallet. 
If goods are damaged in transit please ensure to sign the carrier note accordingly and notify us within 24-48 hours of receipt of goods. Failure to do so within this timeframe may mean we are unable to assist.

How to measure your rooflights

To suit a flat glass rooflight with your own builders upstand

When purchasing a flat glass roof window without a pre installed upstand (to suit a builders kerb), please ensure the outside edge of your own timber upstands are positioned at the same distance as your chosen roof light size.

For example, if you have a rooflight which measures 750mm x 750mm, you need to ensure the measurement from the outside edges of your upstand is the same. Please see the image for further clarification. 

A 50mm wide upstand is recommended as minimum with a maximum width of 120mm. With the lowest edge at 150mm high.

Please see the image A for further clarification.

To suit the Skyvu Lantern

When purchasing a Skyvu lantern  unit, the size you choose needs to represent the dimensions  from the external edge of the kerb. Please ensure that you have upstands of a minimum of 100mm wide.

For example if you purchase a Skyvu Lantern at 600mm x 600mm then this will correlate to the size of the roof opening to the outer edge of the kerb.

Please see the image A for further clarification.

To suit flat glass roof window with a pre installed upstand/kerb

When purchasing a flat glass roof window unit with a pre-installed timber upstand or UPVC upstand, the stated dimensions represent the opening in the roof. Please ensure to measure the opening in the roof and then ensure that this measurement is the same size as the purchased skylight. 

For example, if your skylight is 650mm x 650mm, the opening in the roof also needs to be 
650mm x 650mm.

Please see the image B for further clarification.

For more information on constructing your timber upstand please see the brochure here.

How to choose your rooflight kerb type

Choosing the kerb type for your rooflight depends on your roof, however we have two options to choose from which are detailed below.

Builders Kerb
For when you have or will be constructing your own builders kerb on site. When manufacturing your own builders kerb, it is essential that you either have a minimum slope of 5 degrees across your roof or your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as long as you build a 5 degree minimum slope into the upstand.

Timber Kerb with 5 Degree Sloping Upstand
Your roof can have a minimum of a 1:80 / 1:60 fall, depending on your waterproofing, as the roof light has a built in 5 degree slope for water runoff.

UPVC Kerb without a slope
For this kerb type there is no built in slope so it is essential that your roof has a minimum of 5 degrees to then install the rooflight onto to ensure water runoff.

For more information please see the brochure here.