Loading...
Feefo logo

Industry Experts

50 Years Experience

Finance Available

Spread the Cost

Nationwide Delivery

Fast delivery over mainland UK

ClassicBond SPB Spray Contact Adhesive 500ML - Coverage Up to 3sqm

The ClassicBond Sprayable Contact Adhesive quickly adheres ClassicBond rubber membrane to most materials. Primarily used on up-stands, vertical surfaces and in a 150mm band around the perimeter of the ClassicBond EPDM membrane. Note: It is not possible to re-position the membrane once stu...

Read more
  • Fully ClassicBond Compatible
  • Excellent Adhesion
  • Easy and Fast Installation
  • DIYer and Trade Approved

Description

The ClassicBond Sprayable Contact Adhesive quickly adheres ClassicBond rubber membrane to most materials. Primarily used on up-stands, vertical surfaces and in a 150mm band around the perimeter of the ClassicBond EPDM membrane.

Note: It is not possible to re-position the membrane once stuck down using contact adhesive.

Application to up-stands:

  • Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm.
  • It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive.
  • Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.

Application to non-permeable deck:

  • Spray the adhesive on to both the deck and underside of membrane evenly from an approximate distance of 100-150mm.
  • Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck.
  • Note: It is not possible to re-position the membrane once stuck down using contact adhesive.

Installation Tip: Allow sufficient time for the the contact adhesive to become touch dry dependent on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.

Product Details

Important details about this product:

  • Size: 500ml
  • Coverage: Upto 3sq.m/500ml – 0.17 Ltr / m2 when applied to both sides (depending on surfaces)
  • Glue Type: Contact Adhesive
  • Material: SPB Aerosol Adhesive

Key Features & Benefits

  • Spray applied high-strength adhesive that allows quick bonding.
  • Cleaner, simpler application
  • Up to 6 times faster application time than traditional bonding adhesive
  • Up to 4 times faster drying time than traditional bonding adhesive
  • Increased operating window
  • Zero waste
  • Up to 3 square metres per cannister

Delivery

When do you dispatch orders?

We aim to have orders processed and dispatched on the same day when ordered before 12pm. However some items such as cut to size rubber or larger orders may not be dispatched until the following day. They will however be delivered within the estimated delivery time.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

 

 


 

  •   
  •   
  •   
 

Questions & Answers


ClassicBond vs Skyguard

Both of these are made from EPDM rubber, ClassicBond is 1.2mm & 1.5mm thick whereas SkyGuard is 1.0mm thick. This means the SkyGuard is for use on outbuildings, sheds and any other building not covered by building regs as this requires an EPDM that is 1.14mm thick as a minimum. ClassicBond can be used on all roof types.

ClassicBond vs Firestone

There isn’t much difference between the systems ClassicBond or Firestone now known as Elevate, both are EPDM membranes that come in similar thickness and are installed in a very similar way. They both have BBA certificates and life spans of 50 years. So there isn’t much between them, we here at UKFR prefer the ClassicBond system as it is slightly thicker than the Elevate for the standard system and as an overall system is slightly more affordable.

What is the guarantee on ClassicBond?

ClassicBond EPDM holds a 35 year BBA certificate and a life expectancy of 50 years. If you want to get a materials guarantee we also offer training with our partner company that once trained and qualified each roof can get a 20 year materials guarantee. You would also be on our list of approved installers and if any customer needs any work in your area we pass these leads to you.

How to install classic bond EPDM

ClassicBond is simple to install, it can be installed onto a variety of surfaces and detail sections. Please see our video here on how to install onto a timber deck.

Customer Reviews