The CrylicRoof Roof Repair Sealing Paint is an acrylic roof coat used to repair punctures and damage to all types of roofs, including flat and pitched as well as bituminous surfaces, gutters, brickwork, asbestos, concrete, felt, metal and fibreglass surfaces.

Avaliable in Black and Grey for any application and in tins from 5kg to 20kg to suit a range of repair requirements.

Note: Not suitable for walkways or balconies and is not suitable for use on PVC or timber surfaces or for internal use. 

Coverage

• 5kg Tin: 2.5 - 5.0sq.m
• 10kg Tin: 5 - 10sq.m
• 20kg Tin: 10 - 20sq.m

Deck Preparation

• Before application, it is important to make sure the working surface is clean and dry and free from loose debris such as grit, moss, lichen, dust and dirt.
• Any areas showing signs of fungicidal growth should be treated with a fungicidal wash (applied in accordance with manufacturers instructions) prior to application of CrylicRoof.
• Clean metal surfaces thoroughly with a wire brush to remove rust and provide a good key. Cut and seal splits or blisters prior to application of CrylicRoof.

Application

• Apply to the area using brush or roller at a rate of 1-2 kg per m2 dependant on the substrate, it can also be applied to damp surfaces.
• CrylicRoof will bridge cracks up to 10mm wide due to its fibre content, but larger gaps or voids are best filled with a suitable flexible filler and left to dry prior to applying CrylicRoof.

Drying Time

• Depending on atmospheric conditions or working environment, CrylicRoof typically dries within 2-3 days and will be waterproof immediately after application.

The CrylicRoof Roof Repair Sealing Paint is an acrylic roof coat used to repair punctures and damage to all types of roofs, including flat and pitched as well as bituminous surfaces, gutters, brickwork, asbestos, concrete, felt, metal and fibreglass surfaces.

Avaliable in Black and Grey for any application and in tins from 5kg to 20kg to suit a range of repair requirements.

Note: Not suitable for walkways or balconies and is not suitable for use on PVC or timber surfaces or for internal use. 

Coverage

• 5kg Tin: 2.5 - 5.0sq.m
• 10kg Tin: 5 - 10sq.m
• 20kg Tin: 10 - 20sq.m

Deck Preparation

• Before application, it is important to make sure the working surface is clean and dry and free from loose debris such as grit, moss, lichen, dust and dirt.
• Any areas showing signs of fungicidal growth should be treated with a fungicidal wash (applied in accordance with manufacturers instructions) prior to application of CrylicRoof.
• Clean metal surfaces thoroughly with a wire brush to remove rust and provide a good key. Cut and seal splits or blisters prior to application of CrylicRoof.

Application

• Apply to the area using brush or roller at a rate of 1-2 kg per m2 dependant on the substrate, it can also be applied to damp surfaces.
• CrylicRoof will bridge cracks up to 10mm wide due to its fibre content, but larger gaps or voids are best filled with a suitable flexible filler and left to dry prior to applying CrylicRoof.

Drying Time

• Depending on atmospheric conditions or working environment, CrylicRoof typically dries within 2-3 days and will be waterproof immediately after application.

The CrylicRoof Roof Repair Sealing Paint is an acrylic roof coat used to repair punctures and damage to all types of roofs, including flat and pitched as well as bituminous surfaces, gutters, brickwork, asbestos, concrete, felt, metal and fibreglass surfaces.

Avaliable in Black and Grey for any application and in tins from 5kg to 20kg to suit a range of repair requirements.

Note: Not suitable for walkways or balconies and is not suitable for use on PVC or timber surfaces or for internal use. 

Coverage

• 5kg Tin: 2.5 - 5.0sq.m
• 10kg Tin: 5 - 10sq.m
• 20kg Tin: 10 - 20sq.m

Deck Preparation

• Before application, it is important to make sure the working surface is clean and dry and free from loose debris such as grit, moss, lichen, dust and dirt.
• Any areas showing signs of fungicidal growth should be treated with a fungicidal wash (applied in accordance with manufacturers instructions) prior to application of CrylicRoof.
• Clean metal surfaces thoroughly with a wire brush to remove rust and provide a good key. Cut and seal splits or blisters prior to application of CrylicRoof.

Application

• Apply to the area using brush or roller at a rate of 1-2 kg per m2 dependant on the substrate, it can also be applied to damp surfaces.
• CrylicRoof will bridge cracks up to 10mm wide due to its fibre content, but larger gaps or voids are best filled with a suitable flexible filler and left to dry prior to applying CrylicRoof.

Drying Time

• Depending on atmospheric conditions or working environment, CrylicRoof typically dries within 2-3 days and will be waterproof immediately after application.