GRP Fibreglass Drip Edge Trim 3m A200

The Universal A200 GRP Drip Trim is a drip edge trim which is fitted to the lowest edge of the roof where the rainwater flows into the gutter. To ensure the vertical leg of the trim sits into the centre of the gutter, the trim needs to be packed out by using two support battens, the first fixed just below the level of the deck and the second 10mm below the first, to allow the trim to sit flush with the roof. Installation A single batten should be fixed on to the outside fascia board level with the top edge of the deck. PU adhesive should be applied to the battens in 30mm beads and stainless steel pin nails used to tack into place. Note: Trims are Grey, Red is to show application of the trim.

Important details about this product:

• Type: A200 Drip Edge Trim 
• Length: 3m
• Drop: 90mm
• Flange: >80mm
• Roll: 10mm (Matches B260)
• Colour: Trims are Grey, Red is to show application of the trim.

Key Features & Advantages

• Easy to Install
• Professional Finish
• Durable Material

When do you dispatch orders?

We aim to have orders processed and dispatched on the same day when ordered before 12pm. However some items such as cut to size rubber or larger orders may not be dispatched until the following day. They will however be delivered within the estimated delivery time.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.