Flexitec 2020 EPDM Primer 1 Litre - Coverage 12-15 sqm

The Flexitec 2020 SP primer is a single component primer that is used when the system installation is to take place over an existing EPDM or TPO membrane. 

The Flexitec 2020 SP primer is moisture curing within 2 to 4 hours. 

Application:

• Mix the primer thoroughly by stirring or shaking before application. 
• Brush-apply a thin coat of primer to the substrate. Avoid excess build-up of material in all areas, and especially in corners.
• If necessary, use the brush to spread the material evenly and avoid greater layer thicknesses.

Important details about this product:

• Size: 1 Litre
• Coverage: 12-15sq.m
• Used on: SIngle-Ply roof surfaces such as EPDM & TPO prior to Flexitec 2020 resin application
• Moisture Curing: 2-4 hours

Key Features & Benefits

• Allows for successful installation onto an old EPDM/TPO deck
• Easy to apply

When do you dispatch orders?

We aim to have orders processed and dispatched on the same day when ordered before 12pm. However some items such as cut to size rubber or larger orders may not be dispatched until the following day. They will however be delivered within the estimated delivery time.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are below the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.