ClassicBond Pipe Boot

The ClassicBond Pipe Boot is used to create a waterproof seal between the roof deck and protruding pipework.

Other items required:

• EPDM Rubber Primer
• Seam Roller
• Water Cut Off Mastic

Installation Notes:

1. After installing the roofing membrane place the pipe boot in position by sliding it over the drain or pipe. You may need to cut to required diameter.
2. Mark the roofing membrane to show where rubber primer is to be applied.
3. Remove boot and apply rubber primer.
4. Wait until primer is touch dry and then re-install the pipe boot positioning over the pipe and onto the roof membrane.
5. Smooth down the join with a seam roller.
6. Roll back the top of the boot and apply water cut off mastic around the pipe.
7. Roll back top of boot over mastic and install and tighten hose clip using screw driver.

Important details about this product:

• Sizes available: 12-75mm & 25-150mm
• Material: Moulded EPDM
• Colour: Black

Key Features & Benefits

• Easily creates a waterproof seal between the roof deck and protruding piperwork
• Durable

When do you dispatch orders?

We aim to have orders processed and dispatched on the same day when ordered before 12pm. However some items such as cut to size rubber or larger orders may not be dispatched until the following day. They will however be delivered within the estimated delivery time.

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.