1. Home
2. EPDM Rubber Roofing
3. ClassicBond EPDM
4. Back to ClassicBond Accessories
5. ClassicBond 9 inch elastoform uncured tape

ClassicBond 9 inch elastoform uncured tape

£19.80 (inc. VAT)   £16.50 (ex. VAT)

20.000

• Description
• Product Details
• Delivery
• Videos
• Documents

The ClassicBond 9 inch elastoform uncured tape is designed to form internal and external corners aswell as detailing awkward features, pipes, penetrations, drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.

Installation Notes
The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down!

When used against brickwork, textured or pourous surfaces you can use the ClassicBond Lap Sealant to seal the edge of the tape.

Important details about this product:

• Width: 225mm (9")
• Length: Sold per linear metre
• Material: Synthetic Rubber
• Colour: Black
• Primer: 250ml of ClassicBond primer is needed every 4 linear meters.

Key Features & Advantages

• Excellent long-term strength
• Easy to install

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Elastoform Tape		ClassicBond Installation Guide
	ClassicBond BBA Certificate

• Description
• Product Details
• Delivery
• Videos
• Documents

The ClassicBond 9 inch elastoform uncured tape is designed to form internal and external corners aswell as detailing awkward features, pipes, penetrations, drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.

Installation Notes
The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down!

When used against brickwork, textured or pourous surfaces you can use the ClassicBond Lap Sealant to seal the edge of the tape.

Important details about this product:

• Width: 225mm (9")
• Length: Sold per linear metre
• Material: Synthetic Rubber
• Colour: Black
• Primer: 250ml of ClassicBond primer is needed every 4 linear meters.

Key Features & Advantages

• Excellent long-term strength
• Easy to install

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Elastoform Tape		ClassicBond Installation Guide
	ClassicBond BBA Certificate

Get a Quote

Planning your next project and need cost assistance. We help projects of all sizes and offer money-saving alternatives and discounts for large orders. We strive to respond within 24 hours.
 

Get a quote for your next project

Related Products

Product you might also like...

CALCULATORS DIVIDER

UKFR - ROOFING AND INSULATION SPECIALISTS

Fixings Calculator

Effortlessly secure your warm roof deck with the correct size thermally broken fixings using our intuitive calculator! Simply input your deck type, insulation thickness, and top deck thickness (if applicable) and the calculator will add the compatible size tube and screw combination to your basket. It is crucial to use the correct warm deck insulation fixings so ensure lasting roof durability by using our simple calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

ClassicBond Calculator

EPDM Rubber Roofing has never been easier! Simply enter your roof dimensions, deck type, and roof edges, and the calculator will add all necessary materials for installing your ClassicBond EPDM rubber roof to your basket.

Experience simplicity with our ClassicBond Calculator today!

UKFR - ROOFING AND INSULATION SPECIALISTS

SkyGuard Calculator

SkyGuard Shed Roofing has never been easier!

Our innovative shed roof calculator will automatically add the required quantity of materials to your basket - simply enter your roof dimensions, select your edges and trim preferences and add to basket.

Simplify your DIY with the SkyGuard Shed Roof Calculator today!

Start - SkyGuard Calc

End - SkyGuard Calc

• Description
• Product Details
• Delivery
• Videos
• Documents

The ClassicBond 9 inch elastoform uncured tape is designed to form internal and external corners aswell as detailing awkward features, pipes, penetrations, drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.

Installation Notes
The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down!

When used against brickwork, textured or pourous surfaces you can use the ClassicBond Lap Sealant to seal the edge of the tape.

Important details about this product:

• Width: 225mm (9")
• Length: Sold per linear metre
• Material: Synthetic Rubber
• Colour: Black
• Primer: 250ml of ClassicBond primer is needed every 4 linear meters.

Key Features & Advantages

• Excellent long-term strength
• Easy to install

When do you dispatch orders?

If your order is placed before 12pm we aim to have these processed and dispatched on that same day. However some items have an earlier cut off time and will be dispatched the following day. 

How much will my delivery cost?

Our delivery costs vary depending on what product is ordered and where it is being delivered to. When you add items to your basket and proceed to checkout the delivery prices will be stated. We keep our delivery costs as low as possible and only pass on the rates that our delivery partners charge us.

How long will my delivery take?

On the product page you will see our usual lead time for our items, these are above the ADD TO BASKET button. These are a guide only and we aim to get your items delivered to you ASAP.

	ClassicBond Data Sheet - PS Elastoform Tape		ClassicBond Installation Guide
	ClassicBond BBA Certificate